Aastra Ascotel IntelliGate 2065 - 4.2 Radio units and handsets

Ascotel IntelliGate 2025/2045/2065
Part 8 DECT Compatibility 971
PP: Portable Part
FP: Fixed Part
M: Mandatory (this feature must be supported by GAP-compliant equipment)
O: Optional
—: Office 100 / Office 135 / Office 150 / Office 155pro and Ascotel IntelliGate do not support this feature.
4.2 Radio units and handsets
Tab. 8.5: Compability of radio units and handsets
27 Encryption activation PP initiated O — O —
28 Encryption deactivation FP initiated O — O —
29 Encryption deactivation PP initiated O — O —
30 Calling Line Identification Presentation (CLIP) O ✓ O ✓
31 Internal Call O ✓ O—
32 Service Call O — O —
Devices can be used as of / on Restrictions
SB-4 I4 V4.30 Does not support the Zero-Blind-Slot mode; therefore
only 4 simultaneous call connections possible per radio
unit.
SB-8 I4 V4.30 • On < I6.1 systems the SB-8 responds in the same way as
an SB-4, i.e. it is connected via an AD2 bus only.
• Only 4 simultaneous call connections possible per radio
unit.
SB-8ANT I4 V4.30 • As for SB-8
• Plus: Operation with external antennas is not immedi-
ately possible on < I6.1 systems (installation of a hard-
ware switch required)
Office 100,
Office 150
SB-4, SB-8, SB-8ANT • Does not support the Zero-Blind-Slot mode; therefore
only 4 simultaneous call connections possible per radio
unit.
• The entire DECT system has to operate in Blind-Slot
mode (see Tab. 5.9).
Office 135/135pro,
Office 155pro
SB-4, SB-8, SB-8ANT
No. Feature PP In Office 100 /
Office 135 /
Office 150 /
Office 155pro
FP In Ascotel Intelli-
Gate