Aastra Ascotel IntelliGate A150 - Page 219

System Functions and Features as of I7.9
Call routing 219
syd-0200/3.0 – I7.9 – 11.2009
If the phone number has a route selection prefix, the call will be routed via the cor-
responding route.
Note:
If a number has a route selection prefix and if NPI is E.164, the call will be
routed via the transit route without truncating the prefix.
The exchange access prefix is set under Send access code in the route configuration
of the source PINX.
[1] One and the same trunk group cannot contain both analogue and digital network interfaces.
Fig. 97 Transit routing for private leased-line network → public network with exchange access prefix
Tab. 77 Settings for PINX 2 routing parameters
PINX 1 routing parameters as in Tab. 76, page 218.
Parameter Parameter value
Route 1:
• Trunk groups 1 (reference number of one or more trunk group(s))
• Numbering plan identifier NPI Unknown
• Type of number TON Unknown
• Send access code 170
Trunk group 1:
• Network interfaces Network interfaces of this trunk group
• Network type Private
• Protocol PSS1 (QSIG)
1*/9
1*/91*/9
&Y
DIBOHF
1*4/
5
5
BC
<>
5SVOLHSPVQ%44
5SVOLHSPVQ144
OFUXPSLJOUFSGBDFT
USVOLHSPVQ
5SVOLDPOOFDUJPOT
5
5
4F
3PVUF
SPVUF

&

VOLOPXO