System Functions and Features as of I7.9
Features 401
syd-0200/3.0 – I7.9 – 11.2009
Detailed Description
User B: Charge recall can only be activated from digital system terminals with a dis-
play.
User A: At the end of the call, the user’s exchange access is automatically barred
again.
Under Charge Recall in the AIMS Account Manager a time can be configured for
both standard and phone booth connections by which a charge recall is delayed
when the handset goes on-hook. This means that more than one exchange call can
be made before the charge recall is effected. If the configured time is greater than
zero, the internal user automatically obtains the exchange-free signal when he
picks up the handset again and is able to dial a new number directly. If the user
does not pick up the handset within the time delay, a charge recall is effected.
Tip:
Store charge recall (*32 phone booth No.) under a function key.
Prefix Dialling Procedures
Tab. 227 Charge recall: Procedure
System configuration
Tab. 228 Charge recall: System configuration
Reference to Other Features
*/# procedure
Activate charge recall to standard connection *32 User No.
Parameter Parameter value Remarks
Charge recall: Standard 0 to 120 seconds
Charge recall: Phone booth 0 to 120 seconds
Features:
• "Phone booth", page 491
To Next Page
Loading...
