System Functions and Features as of I7.9
Features 487
syd-0200/3.0 – I7.9 – 11.2009
Tab. 343 Activating/deactivating functions via switch groups:
Note:
When switch groups are switched over, the functions are maintained in
their status at the time.
Available Functions
All remote-controlled functions can be activated with time control. User-specific
features are activated with *06 <user No.>. For an overview of the functions availa-
ble see Tab. 335, page 480 and Tab. 336, page 481. In addition to the remote-con-
trolled features the following functions can also be activated using time control:
Tab. 344 Additional time-controlled functions
Special restart function
In addition to the */# functions a time-controlled restart of the system is also possi-
ble. The "reset" character sequence is entered to obtain this function. After it has
been saved to the PBX, AIMS indicates the function "time-dependent pbx reset". As
a result the "reset" function command remains hidden to unauthorized users. After
a reset the entry is automatically deleted. A reset using a time-controlled function
is clearly identified by the error ID 08625 in the crash log.
Ascotel® IntelliGate® Net:
In an AIN the execution of a time-controlled function is always deter-
mined by the Master’s time. A time zone shift configured for a node is not
automatically taken into account.
No
.
*/# pro-
cedure
Start
(Day)
Stop
(Day)
Execution
date
Execu-
tion time
Switch
group
Meaning
5 *931 Monday Friday 07:00 7 Activate Courtesy group 1
6 #931 Monday Friday 18:00 7 Deactivate Courtesy group 1
7 *85072 20.12.2002 18:30 Switching from switch group 7 to
switch position 2: All functions allo-
cated switch group 7 are deacti-
vated.
8 *85071 06.01.2003 06:30 Switching from switch group 7 to
switch position 1: All functions allo-
cated switch group 7 are activated.
Feature Activate Reset
Activate / deactivate Courtesy *93 <Group No.> #93 <Group No.>
Enable/bar a one-off remote access *754, #754
Enable/bar a permanent remote access *753 #753
To Next Page
Loading...
