System Functions and Features as of I7.9
Features 507
syd-0200/3.0 – I7.9 – 11.2009
Other terminals can be connected to the Ascotel® IntelliGate® 2065 in parallel with
the terminals on the DECT radio system DCT 1800, providing the maximum
number of terminals does not exceed the system limits.
A licence is required to activate the functionality of the Ascotel® Mobility Interface
for connecting the DECT system DCT 1800.
The DECT terminals on the DECT 1800 respond in the same way as internal S-bus
users. In addition the Voice Mail functionality can also be used. Information on
newly received Voice Mail messages is indicated to the DCT users on the display.
Listed below is a rough overview of the main supported features that can be used
by DCT users.
• Display the number / name to the called party (CLIP / CNIP)
• Display the number / name to the calling party (COLP / CONP)
• Redirecting information displayed to the caller and the called party
• Call Forwarding Unconditional (CFU, CFB) and Call Forwarding on No Reply
(CFNR)
• Dealing with the call if party is unobtainable
• Callback to busy / free user (CCBS / CCNR)
• Call waiting
• Hold / Enquiry call / Brokering / Call transfer
• Conference / preconfigured conference
• Differentiated ringing for internal call / external call / callback
• Notification on the display of Voice Mail messages received
As with other S-bus users there is also a number of other configuration options
available for call routing, call logging, user settings, etc. In addition virtually all PBX
features are available using */# procedures.
To Next Page
Loading...
