Connectors
The A-minima uses three connectors for power and accessory input
Following is a detailed list, location and main function of each.
The Lemo 6 connector located at the rear of the camera is the main
accessory connection of the A-minima. It provides remote on/off
control and power output as well a s a connection for accessory
such as a capping shutter.
The lemo 6 connector located at the bottom of the camera body pro-
vides remote on/off, power input and a connection for accessory
such as the Aaton A-minima Power Base.
The Lemo 5 connector located at the rear of the camera, above the
Lemo 6, is the timecode interface. It provides timecode communica-
tion in both ASCII (in and out) and SMPTE (in).
Chapter 4 - Connectors
45
To Next Page
Loading...
