Abarth 695 - Page 63

KNOWING THE INSTRUMENT PANEL
50
Buttonvolume
(Adjustment)
This function may be used to adjust
(to 8 levels) the volume of the acoustic
signal made whenthe
MENU, +
and
– buttons are pressed.
To set the desiredvolume, proceed as
follows:
briefly press the MENU button:
the previously setvolume level will flash
on the display;
press the + or – button to adjust;
press the MENUbuttonbriefly to
return to the menuscreen or hold the
button down to return to the standard
screen without storing.
Seatbeltbuzzer
(Reactivationofbuzzer
forSBRsignal)
This function can be only displayed
after an Abarth Dealership has
deactivated the SBR system (see
paragraph "SBR system" in the "Safety
devices" chapter).
To reactivate this function, proceed as
follows:
press theMENU button briefly
and the display willflash "Off". Press
the
+or – button to display "On";
press theMENU button briefly to
return to the submenu screen or hold
the button down to return to the main
menu screen without saving.
Service(scheduled
servicing)
Using this functionyou can display
information about the mileage intervals
for vehicle servicing.
To consult this information, proceed as
follows:
press thebutton: the display
shows when servicing is due in km/mi
or days (where provided) according
to the previous setting (see paragraph
"Units of measurement");
press thebutton to return to the
menu screen; press the button again to
return to the standard screen.
WARNING The “Service Schedule”
includes vehicle maintenance at fixed
intervals (refer to the "Maintenance and
care" chapter).
This is displayed automatically, with
ignition key at MAR-ON, 2000 km
(or equivalent valuein miles) before
servicing or, wherepresent, 30 days
before servicing. It isalso displayed
each time the keyis turned to MAR-ON
or, where present, every 200 km (or
equivalent value inmiles). Below this
threshold servicingindications are more
frequent.
The display will bein km or miles
according to the unit of measurement
set. When the following scheduled
service deadline isapproaching, the
word “Service” willappear on the
display, followed bythe number of
kilometres/miles ordays (where
present) left, whenthe ignition key
is turned to MAR. Go to an Abarth
Dealership, wherethe "Service
Schedule" operations will be performed
and the messagewill be reset.
When the serviceinterval is reached
and for about 1000km/600 mi or
30 days, a servicedue message is
displayed.
Airbag/Passenger
airbag(frontpassenger
sideairbagand
sidebagforpelvis,
chestandshoulder
protection-Sidebag-
activation/deactivation)
This function is used to
activate/deactivate the front
passenger's airbag. Proceed as
follows:
press the MENUbutton and,
after the display shows the message
"Bag pass: Off" (to deactivate) or the
message "Bag pass: On” (to activate)
through the pressing of the
+ and –
buttons, press theMENU
button
again;
a confirmation request message will
appear on the display;