ABB 615 Series - Technical Data

Table 699: BST Non group settings (Basic)
Parameter Values (Range) Unit Step Default Description
Logic mode 1=Any of selected
2=All of selected
1=Any of selected Selects the used logic mode for general send/
receive signals
5.5.8 Technical data
Table 700: BST Technical data
Characteristic Value
Signalling delay Fiber optic link <5 ms
Galvanic pilot wire link <10 ms
5.5.9 Technical revision history
Table 701: BST Technical revision history
Technical revision Change
B Internal improvement
C Internal improvement
5.6 Emergency start-up 62EST
5.6.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Emergency start-up ESMGAPC ESTART 62EST
5.6.2 Function block
GUID-3AF99427-2061-47E1-B3AB-FD1C9BF98E76-ANSI V1 EN
Figure 407: Function block
Section 5 1MAC059074-MB A
Protection related functions
800 615 series ANSI
Technical Manual