ABB 615 Series - Technical Revision History

8.1.4.7 Technical revision history
Table 800: IA, IB, IC Technical revision history
Technical revision
Change
B Menu changes
C Phase current angle values added to Monitored data
view. Minimum demand value and time added to
recorded data. Logarithmic demand calculation
mode added and demand interval setting moved
under Measurement menu as general setting to all
demand calculations.
D
Internal improvement.
E Internal improvement.
8.1.5 Three-phase voltage measurement VA, VB, VC
8.1.5.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Three-phase voltage measurement VMMXU 3U VA, VB, VC
8.1.5.2 Function block
GUID-5B741292-7FA6-4DEA-8D16-B530FD16A0FE-ANSI V1 EN
Figure 470: Function block
8.1.5.3 Signals
Table 801: VA,VB,VC Input signals
Name
Type Default Description
V_A_AB SIGNAL 0 Phase A voltage
V_B_BC SIGNAL 0 Phase B voltage
V_C_CA SIGNAL 0 Phase C voltage
BLOCK BOOLEAN 0=False Block signal for all binary outputs
Section 8 1MAC059074-MB A
Measurement functions
910 615 series ANSI
Technical Manual