IEC 61850 or Function
name
ANSI Function description
SLGGIO Logic-rotating switch for function selection and LHMI presentation
VSGGIO Selector mini switch extension
DPGGIO IEC 61850 generic communication I/O functions
SPC8GGIO Single Point Generic Control 8 signals
AUTOBITS AutomationBits, command function for DNP3.0
I103CMD Function commands for IEC 60870-5-103
I103IEDCMD IED commands for IEC 60870-5-103
I103USRCMD Function commands user defined for IEC 60870-5-103
I103GENCMD Function commands generic for IEC 60870-5-103
I103POSCMD IED commands with position and select for IEC 60870-5-103
Apparatus control and interlocking
SCILO 3 Logical node for interlocking
BB_ES 3 Interlocking for busbar earthing switch
A1A2_BS 3 Interlocking for bus-section breaker
A1A2_DC 3 Interlocking for bus-section disconnector
ABC_BC 3 Interlocking for bus-coupler bay
BH_CONN 3 Interlocking for 1 1/2 breaker diameter
BH_LINE_A 3 Interlocking for 1 1/2 breaker diameter
BH_LINE_B 3 Interlocking for 1 1/2 breaker diameter
DB_BUS_A 3 Interlocking for double CB bay
DB_BUS_B 3 Interlocking for double CB bay
DB_LINE 3 Interlocking for double CB bay
ABC_LINE 3 Interlocking for line bay
AB_TRAFO 3 Interlocking for transformer bay
SCSWI Switch controller
SXCBR Circuit breaker
SXSWI Circuit switch
POS_EVAL Evaluation of position indication
SELGGIO Select release
QCBAY Bay control
LOCREM Handling of LR-switch positions
LOCREMCTRL LHMI control of PSTO
Secondary system supervision
CCSRDIF Current circuit supervision
SDDRFUF Fuse failure supervision
TCSSCBR Breaker close/trip circuit monitoring
ZCRWPSCH 85 Current reversal and WEI logic for distance protection, 3-phase
ZCLCPLAL Local acceleration logic
ECPSCH 85 Scheme communication logic for residual overcurrent protection
Table continues on next page
1MRK 511 284-UEN A Section 1
Introduction
650 series 11
Engineering manual
To Next Page
Loading...
