IEC08000366 V1 EN
Figure 27: PCM600: Selecting IED from template library
3. Select the IED from the list of available IEDs.
4. Click the icon in the right column of the list of available templates to open the
Template Properties. Verify the template information, see
Figure 28 and click
Close to close the window.
IEC08000367 V1 EN
Figure 28: PCM600: IED Template Properties
5. Click Delete Template to delete the template, click Import Template to import a
template from the selection window or click Create to insert the selected IED to
the bay, see Figure 27.
Section 4 1MRK 511 284-UEN A
Setting up a project
44 650 series
Engineering manual
To Next Page
Loading...
