ABB 650 series - Section 6 Local HMI Engineering; LED and Function Key Engineering; Local HMI Engineering Process

Section 6 Local HMI engineering
6.1 LED and function key engineering
6.1.1 Local HMI engineering process
The engineering process of the LEDLHMI involves several steps.
Figure 42 presents
the pre-engineering step, the main steps in the engineering process and the required
sequences.
IEC09000622_1_en.vsd
Local HMI
ACT / SMT
Select and configure
HMI function blocks
PST
Set function
keys and LEDs
END
SAVE
SAVE
GDE / ACT
Create the
single line diagram
SAVE
IEC09000622 V1 EN
Figure 42: LHMI: Engineering process flowchart
• Application Configuration tool with possible assistance of Signal Matrix tool
1MRK 511 284-UEN A Section 6
Local HMI engineering
650 series 63
Engineering manual