User Interface for Managing Archive Data Section 7 Configuring Archives
104 2PAA107563-600 B
Archive Volume Aspect
The Archive Volume aspect provides a user interface for managing an archive
volume and provides detailed information for the volume. This includes a listing of
the archive entries currently stored within the volume, and a listing of the logs
Active Volume Indicates which volume is currently active.
Volume Indicates the Volume number (Volume Index).
Volume ID For scheduled archive, the volume ID is auto-generated based on
the configured Next label and Volume Format attributes. For manual
archive, the volume ID must be specified in the Initialize Volume
dialog.
(Volume)
State
Indicates the state of the volume. Possible states are:
VALID If the media is initialized and has space for archiving
additional information includes: Fully Published or Partially Published
and if the media is from HPUX, HP-UX will be shown.
NOT_INIT Not initialized but configured in the device, or corrupt
FULL When archive is unable to archive in this volume due to not
enough.
space, then media becomes FULL.
NO_MEDIA There is no media present in this slot
Timeout Overwrite timeout for this volume as specified when the volume was
initialized.This specifies the delay between the time when the volume
becomes full and the time when the volume can be re initialized
(overwritten).
Usage Indicates the amount of space that is currently occupied on this
volume.
Init Time Time when the volume was initialized.
Last Archive
Time
Time when the last archive entry was written to this volume/
Table 9. Archive Device Aspect Main View (Continued)
Field Description
To Next Page
Loading...
