ABB 800xA - Archive Volume Aspect Information

User Interface for Managing Archive Data Section 7 Configuring Archives
106 2PAA107563-600 B
All functions are through the Actions button that is available in the aspect view of
Archive Volume Aspect.
Archive Volume Aspect Information. The information provided on this aspect is
organized in three parts. The top section provides information for the selected
volume, Table 11. The middle section lists the entries currently stored on this
volume, Table 12. When an entry is selected in the middle section, the logs that
were archived for the selected entry are shown in the bottom section, Table 13.
Verifying Signatures for
a Volume
Used to verify electronic signatures on a
volume to determine whether or not the
contents of the volume have been altered
without authorization.
Showing Signature
Information for a Volume
Used to view the signature information for a
volume.
Copying Volumes Used to manually back up archive volumes
Table 11. Volume Information - Top Section
Field Description
Volume ID For scheduled archive, the volume ID is auto-
generated based on the configured Next label and
Volume Format attributes. For manual archive, the
volume ID must be specified in the Initialize Volume
dialog.
Volume Label Optional descriptor to further identify the volume.
Volume State Indicates the volume state. Possible states are:
No Media, Not Initialized, Valid, and Full
additional information for Valid includes:
Fully Published or Partially Published
and if the media is from HPUX, HP-UX will be shown.
Table 10. Archive Functions for Archive Volume Aspect (Continued)
Field Description