User Interface for Managing Archive Data Section 7 Configuring Archives
108 2PAA107563-600 B
Archive Group Aspect
The Archive Group aspect lists all archive groups configured in the system,
Figure 63. Typically, only one such aspect is required; however, additional archive
group aspects may be created for organizational purposes. This aspect is used to
perform manual archives on a group basis. This is described in Manual Archiving
for Archive Groups. In addition, archive group configurations may be added,
deleted, and modified.
The upper pane in this aspect indicates the following for each group: name, state,
service group, number of items (logs) in the group, and description. When an
archive group is selected, a list of the entries assigned to the selected group is
displayed in the lower pane.
For each entry, the lower pane indicates the entry type. If the entry was added
through the Add Group Entry function on the Archive Group aspect, the type will be
indicated as numeric. Also the selected root object will be indicated in the details
column. If the entry was added by entering the Archive group name on a log
configuration template (Property log), the type will be indicated as Ref By Name,
and the number of logs referenced by name for that group will be indicated in the
Details column.
Table 13. Log Information for Selected Entry - Bottom Section
Field Description
Index Sequential number.
Type Numeric as specified in the archive group.
Start Time Start time for archived data.
End Time End time for archived data.
Entries Number of log entries archived for this log.
Log Name Log name.
To Next Page
Loading...
