Section 7 Configuring Archives Archiving Logs Manually
2PAA107563-600 B 119
Overriding Volume Backup
When archive backup is configured, volumes are marked as backed up whenever a
volume backup is successful. This indicates that the volume may be overwritten.
The archive service will not overwrite any volume that is not marked as backed up.
This function is used to mark a volume as backed up, whether or not the volume
actually has been backed up.
To override a volume backup, go to the Archive Device aspect main view, click
Actions and choose Override Volume Backup. This displays a warning message.
Click Ye s to continue or No (or Cancel) to cancel.
Archiving Logs Manually
Typically, archiving is configured to occur periodically according to schedules
configured through the Application Scheduler. A manual (on-demand) archive may
Destination Quota Used to specify a new quota. The default is to use the quota of
the volume being copied. The value is entered in megabytes (MB).
Temporary Storage path
Overwrite Destination This check box is used to specify whether or not to overwrite the
current contents of the specified destination. Checking this box will
allow the contents of the destination directory to be overwritten.
Create ISO Image Checking this check box will create an ISO Image in addition to
the shadow copy in the specified destination.
Do Not Verify
Signatures
Used to specify whether or not to verify signatures. If signatures
are verified, the volume will not be copied if signatures are not
verified.
Preserve Init Time This check box is used to specify whether or not to preserve the
initialization time stamp. Checking this box will preserve the time
stamp.
Table 16. Copy Volume Specification (Continued)
Field Description
To Next Page
Loading...
