Appendix B Calculation using C# Calculation File Variable Sections for Calculations
2PAA107563-600 B 141
e. Click Revert tab and accept changes.
Define sections for Variable Tables. The idea is to define a section with Maximum
64000 or less Variables. Since the definition of the Section can be trivial, following
example explains how to generate variable sections.
Example 1: Defining sections on the basis of Variable Names:
praotstx "%APP_DSN%" -sql "update variables set
section='System' where variablename like 'SYS_%'"
Example 2: Defining Sections on the basis of Variable Id:
praotstx "%APP_DSN%" -sql "update variables set
section='System' where VariableId > 70000"
To check the number of variables for the defined section, run the following
command:
praotstx %app_dsn% -sql "select count(*) from variables where
section like 'System'"
Figure 85. Service Parameters(SimpleConfig)
To Next Page
Loading...
