Appendix D Diagnostic Information for 800xA Start/Stop 800xA History Embedded Data Collector
2PAA107563-600 B 163
3. Double-click the Stop RTDB batch file and type ‘Y’ in the confirmation
prompt as shown in Figure 99 to stop the main real time database
service in
800xA History Embedded Data Collector Node.
Figure 99. Confirmation Prompt for stopping RTDB
Once the Database stopping process is completed, the system displays the message
“RTDB-service has now been stopped. All tables are OK”.
Start/Stop 800xA History Embedded Data Collector
Database
To stop the 800xA History Embedded Data Collector database follow one of the
methods:
1. Start/Stop the database from th
e database control panel.
– To start the database from 800xA Service Structure, refer Starting
Database Using Database Control Panel.
– To stop the database from 800xA Service Structure, refer Stopping
Database using History Control Panel.
2. Start/Stop Database from ABB System 800xA Servic
e Structure.
– To start the database from 800xA Service Structure, refer Starting
Database from ABB System 800xA (if
installed).
To Next Page
Loading...
