ABB 800xA - Starting Database from ABB System 800 Xa (if Installed)

Starting Database from ABB System 800xA (if installed) Appendix D Diagnostic Information for
164 2PAA107563-600 B
– To stop the database from 800xA Service Structure, refer Stopping
Database From ABB System 80
0xA (if installed).
Starting Database from ABB System 800xA (if installed)
1. Double-click the Plant Explorer Workplace icon on the desktop.
2. Click the left side, structure drop-down menu and click Se
rvice Structure in
the menu item as shown in Figure 100
Figure 100. Service Structure in Plant Explorer Workplace
3. Select 800xA History Embedded Data Collector Sync Service Group in
Service Structure through 800xA History SyncService, Service as shown in
Figure 101.