Password Update Procedure on the Data Collector: Appendix F Password Update Procedure
174 2PAA107563-600 B
"%app_root%\config\application\APP_Install_Services" /install all
d. In Windows Services configuration, set the startup type of the RTDB main
service RTDB <RTDBDatabaseDrive>:\RTDBData to Automatic.
6. Restart the History Server.
7. Use the installed user credentials and log on to each one of the Data Collectors
and perform the following steps:
a. Stop RTDB.
b. Navigate to Control Panel > User Accounts > Credential Manager.
c. Edit and Update the password for CPIMS/MAIN_DBADMIN with the
latest password of History Server.
d. Close the Credential Manager.
e. Start the RTDB Services.
f. Open Plant Explorer. Navigate to the Service Structure and update the
password of History Server for 800xA History EventServer Service and
History Supervision aspect.
Password Update Procedure on the Data Collector:
Perform the following steps to update the Data Collector with the new Password.
1. Login to the Data Collector with the installation user.
2. Stop the RTDB Services.
3. Navigate to Control Panel > User Accounts > Credential Manager.
4. Edit and Update Generic Credentials with the new password for
CPIMS/ADMIN, CPIMS/DBADMIN.
5. Perform the following steps to reinstall the RTDB services.
a. Open a Command Prompt (enter cmd in the Run… dialog) and run the
following command to remove the existing services.
"%app_root%\config\application\APP_Install_Services" /remove all
b. Enter "Y" when asked for confirmation.
To Next Page
Loading...
