2PAA107563-600 B 179
Appendix H User Name Update Procedure
User Name Update Procedure on the 800xA History
Server and 800xA History DCN nodes
This section describes the steps that have to be followed on the History Server and
Data Collector when the Database Admin User Name or DB Admin User Name is
changed. This section does not include the procedure to change the user name of the
source historian that the Data Collector is collecting from. Please make sure that the
New User name of the Windows User account, used for Database Admin, is already
created. Contact Microsoft for the detailed procedure on creating the Windows User
account.
Instructions for Changing the Admin user
Follow the steps below to update the History Server with the new User name.
1. Log on with the user account that was originally used for installing RTDB.
2. Stop RTDB
3. Modify the name and password of the new account to the Windows vault entry
“CPIMS/ADMIN”
Navigate to Control Panel > User Accounts > Credential Manager
4. Add the user to the RTDB-Admin group by running:
“%app_root%\Config\Security\APP_Create_users.bat”
5. Reinstall the services
a. “%app_root%\config\application\APP_Install_Services” /remove all
b. “%app_root%\config\application\APP_Install_Services” /install all
c. Set the startup type of RTDB main service back to Automatic
To Next Page
Loading...
