ABB 800xA - Viewing Events by Specific Time and Date

Viewing Events by Specific Time and Date Section 4 Visualization and Data Access
40 2PAA107563-600 B
drop-down menu and then click Hour(s) option from the second drop-down
menu as shown in Figure 15. The events for the selected duration appears in the
main window.
Figure 15. Viewing Events by Duration
Viewing Events by Specific Time and Date
Perform the following steps to view the events by querying for specific time:
1. Select the Enable Mask ch
eck box.
2. Click the pin icons
on the EventTime status bar as shown in Figure 16 to
enable time specific selection.
3. Select the applicable date from the
first drop-down menu.
4. Select the appropriate time from the second drop-down menu.