Section 7 Configuring Archives Adding an Archive Group
2PAA107563-600 B 91
Adding an Archive Group
Archive groups are configured and managed via the update object. Typically, this
object is added under the Industrial IT Archive object in the Node Administration
structure (using the Archive Service Aspect as described in Adding an Archive
Device on page 82). To do this:
1. In the Plant Explorer, select the Node Administration Structure.
2. Navigate to and expand the object tree for the node being added to the archive
g
roup.
3. In the object tree for the s
elected node, expand the Industrial IT Service
Provider tree and select the Industrial IT Archive object.
4. Select the Archive Service Aspect from this object’s aspect list.
5. Click Ar
chive Group, Figure 51.
Figure 51. Creating a New Archive Group
This displays the New Archive Group dialog, Figure 52.
To Next Page
Loading...
