Figure 52. New Archive Device Object Dialog
Archive Group Aspect Section 7 Configuring Archives
92 2PAA107563-600 B
6. Enter a name for the object in the Name field, for example: ArchGroupOnAD,
click OK.
Keep the Show Aspect Config Page check box checked. This will automatically
open the configuration view of the Archive Device aspect.
This adds the Archive Group object under the Industrial IT Archive object and
creates an Archive Group Aspect for the new object. Use this aspect to configure
one or more archive groups as described in Archive Group Aspect on page 92.
Archive Group Aspect
The Archive Group aspect is shown in Figure 53.
To Next Page
Loading...
