ABB 800xA - Adding and Configuring an Archive Group

Figure 53. Archive Group Aspect
Section 7 Configuring Archives Archive Group Aspect
2PAA107563-600 B 93
The primary function of the Archive Group aspect is to add and configure archive
groups. This is described in Adding and Configuring an Archive Group on page 93.
After configuring an archive group, make changes to the group, or to the archive
entries added to the group. This is described in Adjusting Archive Group
Configurations on page 96.
This aspect also is used to invoke manual archive operations on an archive group
basis.
Adding and Configuring an Archive Group
To add and configure an Archive Group:
1. Right click inside the archive groups window (or click Ac
tions) and choose
New Group, Figure 54.