ABB AC500-eCo Series - Terminal Block; AC500 Hardware Dimension

________________________________________________________________________________________________________
AC500-eCo - 18 - Hardware Introduction
3.2.2 Terminal Block
The terminal block has to be embedded on the fixed terminals and only after that the cable can be
connected during the terminal block.
Depending on how many poles on the terminal block, there were three kinds:
- 5 poles for the power supply;
- 9 poles for the inputs of the S500 modules;
- 11 poles for the outputs of the S500 modules.
Depending on the wiring method there were also three kinds:
- front screw, side cable;
- front spring, front cable;
- Side screw, front cable.
For detailed wiring diagram please read the AC500 user’s manual.
3.3 AC500 Hardware Dimension
CPU I/O Module
Figure 10 Dimensions of the AC500 CPU (type PM554, PM564) and I/O Module