ABB AC500 - Page 87

____________________________________________________________________________________________________________
G1 Introduction to AC500 1-85 AC500 / Issued: 07.2006
The I/Os will have the following CPU addresses in the CPU mapping table:
Channels Address in
the mapping /
programming
software
Comment
Digital inputs 0-15 %IW0 All the 16 digital inputs combined as Word from the
DC532 module
Digital inputs 0-7 %IB0 All the 8 first digital inputs combined as Byte
Digital inputs 8-15 %IB1 All the 8 following digital inputs combined as Byte
Single digital input 0
to
single digital input 7
%IX0.0
to
%IX0.7
Single digital input as a bit for the input 0 to the input 7
Single digital input 8
to
single digital input 15
%IX1.0
to
%IX1.7
Single digital input as a bit for the input 8 to the input 15
Digital configurable
inputs 16-31
%IW1 All the 16 digital configurable I/Os as inputs in combined
as Word from the DC532 module
Digital configurable
inputs 16-23
%IB2 All the 8 following digital configurable I/Os as inputs
combined as Byte
Digital configurable
inputs 24-31
%IB3 All the 8 following digital configurable I/Os as inputs
combined as Byte
Single digital
configurable input 16
to
single digital
configurable input 23
%IX2.0
to
%IX2.7
Single digital configurable I/Os as input as a bit for the
input 16 to the input 23
Single digital
configurable input 24
to
single digital
configurable input 31
%IX3.0
to
%IX3.7
Single digital configurable I/Os as input as a bit for the
input 24 to the input 31
Digital configurable
outputs 16-31
%QW0 All the 16 digital configurable I/Os as outputs combined
as Word from the DC532 module
Digital configurable
outputs 16-23
%QB0 All the 8 following digital configurable I/Os as outputs
combined as Byte
Digital configurable
outputs 24-31
%QB1 All the 8 following digital configurable I/Os as outputs
combined as Byte
Single digital
configurable output 16
to
single digital
configurable output 23
%QX0.0
to
%QX0.7
Single digital configurable I/Os as output as a bit for the
output 16 to the output 23
Single digital
configurable output 24
to
single digital
configurable output 31
%QX1.0
to
%QX1.7
Single digital configurable I/Os as output as a bit for the
output 24 to the output 31
For more details concerning the I/O mapping, please refer to the AC500 User's manual.