1.4.2.2 Configure your CPU
1. Double-click “PLC_AC500_V3”.
ð
A tab opens in the editor view.
2. Select “CPU-Parameters Parameters”.
3. Under parameter “Check battery”, choose the value “Off” since there is no battery present
inside the CPU module.
4. Keep the default values for all other parameters.
1.4.2.3 Create folders in the device tree
To optimize the project readability, you will create different folders to group similar objects. The
folder names are exemplary. Because the device tree view follows an alphabetical order, we use
number prefixes to determine the order.
Getting started with AC500 V3 products
Example project for central I/O expansion > Create, set-up and save your AC500 V3 project
2021/05/14 3ADR010584, 2, en_US 15
To Next Page
Loading...
