ABB ACH480 - Brake resistor connection data

Maximum motor cable length, 4 kHzFrame
C3C2
C1
1)
ftmftmftm
With optional external EMC filter
1-phase 200 … 240 V
331033103310R0
331033103310R1
------R2
3-phase 200 … 240 V
66206620--R1
66206620--R2
66206620--R3
66206620--R4
3-phase 380 … 480 V
131401314013140R1
131401314013140R2
131401314013140R3
983098309830R4
1)
Category C1 with conducted emissions only. Radiated emissions are not compatible when measured
with the standard emission measurement setup and must be measured on cabinet and machine
installations for each case.
Brake resistor connection data
The brake resistor output is conditionally short-circuit proof by
IEC/EN 61800-5-1 and UL 61800-5-1.
Short-circuit protec-
tion (IEC 61800-5-1,
IEC 60439-1,
UL 61800-5-1)
Rated conditional short-circuit current is as defined in IEC 60439-1.
Technical data 169