ABB ACH480 - Storage conditions; Materials; Drive; Drive package

Transportation in the
protective package
Storage in the pro-
tective package
Operation installed
for stationary use
Requirement
--frequency
10 … 150 Hz;
Sinusoidal vibration
(IEC 60068-2-6, Test
Fc 2007-12) amplitude ±0.075 mm
(0.003 in),
10 … 57,56 Hz;
constant peak acceler-
ation 10 m/s
2
(33 ft/s
2
), 57,56 … 150
Hz; sweep: 1 oct/min;
10 sweep cycles in
each axis with STO
active;
uncertainty ±5.0%;
normal mounting
According to ISTA 1A.According to ISTA 1A.Not permittedShock/(IEC 60068-2-
27, ISTA 1A)
Max. 100 m/s
2
(330 ft/s
2
), 11 ms.
Max. 100 m/s
2
(330 ft/s
2
), 11 ms.
76 cm (30 in)76 cm (30 in)-Free fall
Storage conditions
Store the drive in humidity controlled enclosed environments. Keep the drive in
its package.
Materials
￭
Drive
Refer to ACx480 drives recycling instructions and environmental information
(3AXD50000102372 [English]).
￭
Drive package
• Cardboard
• Molded pulp
• PE (suspension film package, plastic bag).
￭
Package materials for options, accessories and spare parts
• Cardboard
• Kraft paper
Technical data 173