ABB ACH480 - Start-up; Technical data

Start-up
To configure the BAPO-01 module:
1. Power up the drive.
2. Set the parameter 95.04 Control board supply to 1 (External 24V).
Technical data
Voltage and current rating for the auxiliary power supply: +24 V DC ±10%, max.
1000 mA (including internal fan load).
Power loss: Power losses with maximum load 4 W.
Dimensions:
26 [1.024]
11.3 [0.444]
16 [0.63]
86.1 [3.391]
171.6 [6.754]
181.3 [7.138]
42.2 [1.662]
13.3 [0.524]
68.5 [2.697]
52.5 [2.067
2.5 [0.098]
6 [0.24]
4.5 [0.177]
250 BAPO-01 auxiliary power extension module