E-Clipse Bypass Configurations for ACH550 Drives 99
Technical Data
Standard Enclosure, B4
Outside Dimensions (V1...V4 and B1...B3, Wall Mounted Units)
Vertical E-Clipse Bypass, UL type 1, V1…V4
* Keep a minimum of two inches of free space on each side and 8 inches of free space above and below all units from non-heat
producing sources. Double these distances from heat producing sources
Enclosure
Weight
B4
kg
lb.
IP 21 / UL type 1 454
1000
IP 54 / UL type 12 474
1045
Vertical E-Clipse Bypass, UL type 1
Dimensions
Ref.
V1 V2 V3 V4
mm
in. mm in. mm in. mm in.
W* 136
5.4 136 5.4 214 8.5 215 8.5
H* 1020
40.2 1120 44.1 1211 47.7 1316 51.8
D* 220
8.7 231 9.1 241.6 9.5 271 10.7
H
WD
To Next Page
Loading...
