100 E-Clipse Bypass Configurations for ACH550 Drives
Technical Data
Standard E-Clipse Bypass, UL type 1, B1…B3
* Keep a minimum of 2 inches of free space on each side and 8 inches of free space above and below all units from non-heat
producing sources. Double these distances from heat producing sources
Standard E-Clipse Bypass, UL type 1, B1...B3
Dimensions
Ref.
B1 B2 B3
mm in. mm in. mm in.
W 443
17.4 521 20.5 713 28.1
H 849
33.4 957 37.7 1212 47.7
D 344 13.5 389 15.3 485 19.1
To Next Page
Loading...
