102 E-Clipse Bypass Configurations for ACH550 Drives
Technical Data
Standard E-Clipse Bypass, UL type 3R, B1…B2
* Keep a minimum of 2 inches of free space on each side and 8 inches of free space above and below all units from non-heat
producing sources. Double these distances from heat producing sources
Standard E-Clipse Bypass, UL type 3R, B1...B2
Dimensions
Ref.
B1 B2
mm in. mm in.
W 452 17.8 530 21.0
H 865
34.0 968 38.0
D 343
13.5 389 15.0
To Next Page
Loading...
