PE,
T1/U, T2/V, T3/WFrame
size
lbf·ftN·mMlbf·ftN·m
1.62.2M54.15.6R5
Input power cabling
9. Repeat steps 6…7 for the conductors.
10. Connect the conductors as for the motor cabling. Use terminals L1, L2 and L3.
Tighten the screws to the torque given in the table.
11. Install the cable box plate. Position the plate (11a) and tighten the screw (11b).
PE,
L1, L2, L3Frame size
lbf·ftN·mMlbf·ftN·m
1.62.2M54.15.6R5
Electrical installation – North America 181
To Next Page
Loading...
