Installing the drive
￭ Installing the drive vertically, frames R1…R4
The figures show frame R3 as an example.
Select fasteners and their application to meet local requirements appropriate to wall
surface materials, drive weight and application.
1. Mark the hole locations using the mounting template included in the package. Do
not leave the mounting template under the drive. The drive dimensions and hole
locations are also shown in the drawings in chapter Dimension drawings (page 309).
2. Drill the mounting holes.
3. Insert anchors or plugs into the holes and start the bolts into the anchors or plugs.
a
b
1 2
3
×4
×4
×4
R1…R2: M5 (#10)
R3…R4: M6 (¼ in)
R4 v2R4R3R2R1
inmminmminmminmminmm
6.301606.301606.301603.86983.8698a
24.3761924.3761918.6247316.4241712.48317b
lbkglbkglbkglbkglbkgWeight IP21
(UL Type 1)
48.522.041.919.026.011.814.66.610.14.6
lbkglbkglbkglbkglbkgWeight IP55
(UL Type 12)
50.723.044.120.028.713.015.06.810.64.8
76 Mechanical installation
To Next Page
Loading...
