ACH580 E-Clipse bypass and packaged drive user manual 101
Embedded fieldbus
Metasys integration
The following diagram shows the drives’ integration to the Johnson Controls
Metasys system.
The following diagram shows the drives’ integration to the Johnson Controls
Metasys Companion system.
On the N2 Fieldbus each system can be accessed by the full complement of
Metasys FMS features, including Change-of-State (COS) monitoring, warning
notification, scheduling, trend, and totalization.
On one N2 Fieldbus segment there can be up to 32 nodes while integrating the
E-Clipse Bypass system with Johnson Controls Metasys. Each E-Clipse bypass may
N2 Fieldbus
PC Version
Panel Version/LTD
RS232 -RS485 Converter
To Next Page
Loading...
