ABB ACQ580-31 - Page 117

Mechanical installation for ACH580-31 and ACQ580-31 117
8. Attach chains to the drive lifting holes and lift the drive with a lifting device onto the
opening in the mounting plate.
9. Attach the bottom bracket with one screw.
10. Attach the top bracket with one screw.
11. Attach the rest of the mounting screws. Remove the chains.
8 9
10 11
1 × M6×25 screw
6 N·m
1 × M6×25
screw
6 N·m
R0…R1: 8 × M6×25 screw
R2: 10 × M6×25 screw
R3: 12 × M6×25 screw
R4…R5: 14 × M6×25
screw
6 N·m