ABB ACQ810 - Page 132

132 Parameters
08.06 Alarm word2 Alarm word 2. Can be reset by entering a 0. -
08.07 Alarm word3 Alarm word 3. Can be reset by entering a 0. -
08.08 Alarm word4 Alarm word 4. Can be reset by entering a 0. -
No. Name/Value Description FbEq
Bit Name
0 Reserved
1 FIELDBUS COMM (page 315)
2 LOCAL CTRL LOSS (page 315)
3 AI SUPERVISION (page 315)
4 FB PAR CONF (page 315)
5 NO MOTOR DATA (page 315)
6…15 Reserved
Bit Name
0…2 Reserved
3 PS COMM (page 316)
4 RESTORE (page 316)
5 CUR MEAS CALIBRATION (page 316)
6 Reserved
7 EARTH FAULT (page 316)
8 AUTORESET (page 316)
9 MOTOR NOM VALUE (page 316)
10 Reserved
11 STALL (page 316)
12 LCURVE (page 316)
13 LCURVE PAR (page 316)
14 FLUX REF PAR (page 316)
15 Reserved
Bit Name
0 OPTION COMM LOSS (page 316)
1 SOLUTION ALARM (page 320)
2 MOTTEMPAL2 (page 317)
3 IGBTOLALARM (page 317)
4 IGBTTEMPALARM (page 317)
5 COOLALARM (page 317)
6 MENU CHANGED (page 317)
7 TEMP MEAS FAILURE (page 318)
8 Maintenance counter alarms 2055…2071 (page 318)
9 DC NOT CHARGED (page 318)
10 AUTOTUNE FAILED (page 318)
11 START INTERLOCK (page 318)
12 EFB COMM LOSS (page 319)
13…15 Reserved