ABB ACQ810 - Page 155

Parameters 155
Supervision1 Bit 0 of 06.13 Superv status (see page 129). 1073743373
Supervision2 Bit 1 of 06.13 Superv status (see page 129). 1073808909
Supervision3 Bit 2 of 06.13 Superv status (see page 129). 1073874445
Const Bit pointer setting (see Terms and abbreviations on page
109).
-
Pointer
14.54 RO5 src Selects a drive signal to be connected to relay output RO5.
Trad pump5 Bit 4 of 05.02 Trad pump cmd (see page 125). 1074005250
Ready Bit 0 of 06.01 Status word1 (see page 126). 1073743361
Enabled Bit 1 of 06.01 Status word1 (see page 126). 1073808897
Started Bit 2 of 06.01 Status word1 (see page 126). 1073874433
Running Bit 3 of 06.01 Status word1 (see page 126). 1073939969
Alarm Bit 7 of 06.01 Status word1 (see page 126). 1074202113
Ext2 active Bit 8 of 06.01 Status word1 (see page 126). 1074267649
Fault Bit 10 of 06.01 Status word1 (see page 126). 1074398721
Fault(-1) Bit 12 of 06.01 Status word1 (see page 126). 1074529793
Ready relay Bit 2 of 06.02 Status word2 (see page 127). 1073874434
RunningRelay Bit 3 of 06.02
Status word2 (see page 127). 1073939970
Ref running Bit 4 of 06.02 Status word2 (see page 127). 1074005506
Charge ready Bit 9 of 06.02 Status word2 (see page 127). 1074333186
Neg speed Bit 0 of 06.03 Speed ctrl stat (see page 128). 1073743363
Zero speed Bit 1 of 06.03 Speed ctrl stat (see page 128). 1073808899
Above limit Bit 2 of 06.03 Speed ctrl stat (see page 128). 1073874435
At setpoint Bit 3 of 06.03 Speed ctrl stat (see page 128). 1073939971
Supervision1 Bit 0 of 06.13 Superv status (see page 129). 1073743373
Supervision2 Bit 1 of 06.13 Superv status (see page 129). 1073808909
Supervision3 Bit 2 of 06.13 Superv status (see page 129). 1073874445
Const Bit pointer setting (see Terms and abbreviations on page
109).
-
Pointer
No. Name/Value Description FbEq