ABB ACQ810 - Page 36

36 The ACQ810 control panel
How to reset faults
5. Press . The panel allows you to edit necessary
parameters to correct the fault.
6. Specify a new value for the parameter with keys
and .
To accept the new value, press .
To cancel the new value and keep the original, press
.
Step Action Display
1. When a fault occurs, a text identifying the fault is shown.
To reset the fault, press .
To return to the previous display, press .
Step Action Display
OK
3003 Local ctrl loss
PAR EDIT
Fault
EXIT SAVE00:00
[1]
LOC
SAVE
EXIT
3003 Local ctrl loss
PAR EDIT
Spd ref Safe
EXIT SAVE00:00
[2]
LOC
RESET
EXIT
FAULT 36
LOCAL CTRL LOSS
FAULT
RESET EXIT
LOC