Operation principle and hardware description 29
number. The type designation label is located on the front cover. An example label is
shown below.
Type designation key
The type designation contains information on the specifications and configuration of the
drive module. The first digits from left express the basic configuration eg, ACQ810-04-
477A-4. The optional selections are given thereafter, separated by plus signs eg, +L519.
The main selections are described below. Not all selections are available for all types. For
more information, refer to ACQ810-04 Ordering Information (00588241), available on
request.
Selection Alternatives
Product series ACS850 product series
Type 04 Drive module. When no options are selected: IP00 (UL open type), top
entry, side exit, JCU drive control unit with front cover, control panel
holder and control panel, EMC filter for Category C3, common mode
filter, Standard pump control program, Safe torque off function, coated
boards, pedestal with output on the long side, output busbar set for
motor, base and wall mounting brackets, Quick start-up guide
(multilingual) and CD containing all manuals.
Size Refer to the rating tables, page 105
Voltage range (nominal
rating in bold)
4 380…480 V AC
+ options
Filter 0E200 No EMC filter
Control panel and control
unit
0J400 No control panel and panel holder
J410 Control panel with door mounting kit. Includes control panel mounting
platform, IP54 cover and a 3-meter panel connection cable.
0C168 No control panel, panel holder and front cover for the JCU Control Unit
Fieldbus K... +K451: FDNA-01 DeviceNet adapter
+K452: FLON-01 LonWorks adapter
+K454: FPBA-01 PROFIBUS DP adapter
+K458: FSCA-01 Modbus adapter
+K466: FENA-01 Ethernet/IP and Modbus/TCP adapter
I/O extensions and
feedback interfaces
L... +L500: FIO-11 analogue I/O extension
+L519: FIO-21 analogue and digital I/O extension
+L511: FIO-31 digital I/O extension with four relays
Type designation, see section Type designation key below.
Serial numberRatingsFrame size