x ACS 300 User’s Manual
Product Conformity in EEA
• the following clauses of technical standards and specifications
have been used:
Furthermore it is not allowed to put the equipment into service
until the machinery into which it is to be incorporated or of which
it is to be a component has been found and declared to be in
conformity with the provisions of this Directive and with national
implementing legislation, i.e. as a whole, including ACS 300
frequency converters.
EN 60529: 1991
IEC 664-1: 1992 Installation Category III, Pollution Degree 2
IEC 721-3-1: 1987 Combination of classes 1K4/1Z2/1Z3/1Z5/1B2/1C2/1S3/1M3
IEC 721-3-2: 1985 Combination of classes 2K4/2B2/2C2/2S2/2M3
IEC 721-3-3: 1987 Combination of classes 3K3/3Z2/3Z4/3B1/3C2/3S2/3M1
To Next Page
Loading...
