ACS 300 User’s Manual ix
Product Conformity in EEA
Machinery Directive
Machinery Directive 89/392/EEC, Art. 4.2 and Annex II, Sub B.
ACS 300 Frequency Converters including all types, as specified
in User´s Manual, Tables 1-1 and 1-2
• are intended to be incorporated into machinery to constitute
machinery covered by this Directive, as amended
• do therefore not in every respect comply with the provisions of
this Directive
• the following clauses of harmonised standards have been
applied:
Clause 5.3.1 Supply disconnecting (isolating) device
- manufacturer of the machine is responsible of the installation
- please, refer to Chapter “Safety Instructions”
Clause 6.2.1 Protection by enclosures
- degree of protection is chosen according to the place of use
- please refer to Chapter 9 “Environmental Limits”
Clause 9.2.2 Stop functions
- manufacturer of the machine is responsible of the installation
- please, refer to Chapter “Safety Instructions”
Clause 9.2.5.4 Emergency stop
- manufacturer of the machine is responsible of the installation
- please, refer to Chapter “Safety Instructions”
Clause 13.3 Degrees of protection
- degree of protection is chosen according to the place of use
- please, refer to Chapter 9 “Environmental Limits”
EN 60204-1: October 1992 with exceptions as described in the connec-
tion of Low Voltage Directive (see above)
To Next Page
Loading...
