Chapter 1 – Introduction
ACS/ACC/ACP 601 Drives ACx=ACS/ACC/ACP 1-3
Inquiries
Any inquiries about the product should be addressed to the local
distributor or ABB representative, quoting the type code and the serial
number of the unit. If the local ABB representative cannot be
contacted, inquiries should be directed to the address and phone
numbers on the back cover of this manual.
17 Degree of Protection
Appendix A:
Enclosures
0 = IP 00 (chassis), A = IP 21, 2 = IP 22, 4 = IP 42,
5 = IP 54, 6 = IP 00 with Coated Boards,
7 = IP 22 with Coated Boards,
8 = IP 42 with Coated Boards
9 = IP 54 with Coated Boards
B = IP 21 with Coated Boards
18 Line Input and Protection Options
19 Starter for Auxiliary Motor Fan
20 Filters
Appendix A:
CE marking
0 = CE with EMC Filters (not for 690V or 12-pulse
rectifier)
3 = CE with output dv/dt Filters + EMC Filters (not for
690V)
5 = Output dv/dt Filters + no EMC Filters
8 = US Standard, US conduit: No CE, no EMC filters,
9 = CE Low Voltage and Machinery Directives; No EMC
(ACS 607 only, secondary of all transformers
220 VAC)
21 Braking Chopper and Cabling Direction
0 = No Brake Chopper - Bottom Entry / Bottom Exit (BE/
BE
1 = Brake Chopper (BE / BE)
3 = Input Power Top Entry / Output Power Bottom Exit
4 = Input / Output Power Top Entry / Exit
5 = Option 1 and 3
6 = Option 1 and 4
22 Other Options
0 = None, 1 = Version 5.0 Software
Character
no.
Meaning Refer to
To Next Page
Loading...
