09 OPERATION
3BHS213401 E01 REV H ACS1000 AIR-COOLED USER MANUAL 123/184
5. Start the motor.
- After the motor has been magnetized, the motor speed ramps up to the reference value.
- While the motor is accelerating, the run status indication on the display blinks. When the
motor speed has reached the reference value, the run status indication lights
up permanently.
The display shows Running to indicate that the drive is operating.
1 L -> [600.0 rpm] 0
Status Ready to Strt
MotorSpeed 0.00 rpm
Power 0.0 %
1 L -> [600.0 rpm] 0
Status Magnetizing
MotorSpeed 0.00 rpm
Power 0.0 %
1 L -> 600.0 rpm I
Status Running
MotorSpeed 600.0 rpm
Power 30.0 %
To Next Page
Loading...
