Mechanical installation
38
Installing conduit fittings
Install conduit fittings according to manufacturer recommendations for hole sizes
1/2" and 3/4".
The 12.5 mm diameter hole is for the optional pressure compensation valve
(+C169). Do not use it for any other purpose.
Cable gland kit part list
Tightening torques
Note: Tightening torques for US-specific conduit fittings are not listed below. Consult
the manufacturer for the tightening torques.
R1 Cable Gland Kit,
3AUA0000045483
R3 Cable Gland Kit,
3AUA0000045484
Pcs Part Pcs Part
5 M25 cable gland 2 M32 cable gland
3 M25 back nut 2 M32 back nut
1 M12 cable gland 3 M25 cable gland
1 M25 back nut
1 M12 cable gland
Tightening torques Tightening torques, optional parts
Part N
·mPart N·m
Panel cover screws 2.0 Cable gland, size M12 3.0
Cover screws 2.0 Cable gland, size M25 8.0
Cable gland screws 2.0 Cable gland, size M32 10.0
EMC and VAR screws 0.5 Pressure compensation valve 0.8
Fan screws 1.2 Cable hole plugs 1.5
R1 input switch terminal screws 0.8
R3 input switch terminal screws 2.0
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
