ACS51
0
User’s Manual 25
Installation
Re-install Cover
IP21
1. Align the cover and slide it on.
2. Tighten the captive screw.
3. Re-install the control panel.
IP54
1. Align the cover and slide it on.
2. Tighten the captive screws around the edge of
the cover.
3. R1…R4: Slide the hood down over the top of
the cover.
4. R1…R4: Install the two screws that attach the
hood.
5. Install the control panel.
Note! The control panel window must be
closed to comply with IP54/UL type 12.
6. Optional: Add a lock (not supplied) to secure
the control panel window.
Supplied from China by: Guangzhou Tofee Electro Mechanical Equipment Co., Ltd
Email: info@tofee.com.cn
To Next Page
Loading...
