70 Installation instructions
Moving and unpacking the unit
WARNING! Obey the safety instructions in chapter Safety instructions. If you
ignore them, injury or death, or damage to the equipment can occur.
Move the transport package by pallet truck to the installation site.
Unpack the package as follows (see the package drawing on page 71):
• Cut the bands (A).
• Unpack the additional boxes (B).
• Remove the outer sheathing by lifting it (C).
• Remove the sheathing by lifting it (D).
• Remove the pedestal guide plate (not included with options +0H354 and +0P919) as
shown below.
To Next Page
Loading...
