ABB ACS560 - Page 119

DefaultUnitRange/ListNameIndex
1.00h0.00…42949672.95PFC autochange interval76.71
10.00h0.00…1000000.00Maximum wear imbalance76.72
100.0%0.0…300.0Autochange level76.73
Aux motors
only[1]
-All motors[0], Aux mo-
tors only[1]
Autochange auxiliary PFC76.74
Available. PFC
motor is avail-
able [1]
-0...10PFC interlock 176.81
Timed function
2[9]
DI5[6]DI2[3]Interlocked. PFC
motor is not in
use[0]
Timed function
3[10]
DI6[7]DI3[4]Available. PFC mo-
tor is available[1]
Other...Timed function 1[8]DI4[5]DI1[2]
Available. PFC
motor is avail-
able [1]
-See parameter 76.25
PFC interlock 1
PFC interlock 276.82
Available. PFC
motor is avail-
able [1]
-See parameter 76.25
PFC interlock 1
PFC interlock 376.83
Available. PFC
motor is avail-
able [1]
-See parameter 76.25
PFC interlock 1
PFC interlock 476.84
Disable[0]-Disable[0], Enable[1],
Other...
Regulator bypass control76.95
77 PFC maintenance and monitoring
Done[0]-0...5PFC runtime change77.10
Reset PFC2 run time[3]Done[0]
Reset PFC3 run time[4]Set any PFC run time[1]
Reset PFC4 run time[5]Reset PFC1 run time[2]
0.00h0.00…42949672.95Pump/fan 1 running time77.11
0.00h0.00…42949672.95Pump/fan 2 running time77.12
0.00h0.00…42949672.95Pump/fan 3 running time77.13
Parameter listing 119
EN
HI